Water Damage Restoration Northern Virginia
Water Damage Restoration of Properties
When it comes to water damage restoration, Northern Virginia has some of the most efficient restoration teams. Water damage unfortunately occurs as an unwanted consequence of flooding and other water-saturating problems. Water damage restoration, Northern Virginia teams explain, is a challenging task because the assessment and gauging of the extent of the damage can be quite tricky. This is due to the fact that water can reach into and accumulate in spaces that are hard-to-see. Water has the ability to seep into both wood and concrete, which can cause these materials to disintegrate over time. In worse cases, the trapped water has already become a breeding ground for molds and bacteria by the time it is discovered. Another worse-case scenario is when the water actually carries toxins, such as toxic chemicals, and these toxins have already acted on the materials that were affected and can no longer be restored after taking the damage from those chemicals.
When performing water damage restoration, Northern Virginia follows the standard safety guidelines laid down by the IICRC (Institute of Inspection, Cleaning, and Restoration Certification) for flood clean-ups. The guidelines include the following safety practices:
– Be alert and cautious when entering a flooded building. Flooded houses and structures can be prone to collapsing or become a dangerous pool of electrified water. You must ensure first that the electrical power source is turned off and that the structure is still intact.
– Be sure to use the appropriate protective gears. Use a vapor respirator, protective eyewear, long waterproof footwear or boots, long rubber gloves, and protective clothing when inspecting a flooded building. Ventilate the rooms adequately by carefully opening the windows and or placing fans at the windows.
– Do not hesitate to discard porous items that have been completely saturated by floodwater. These materials will be unfit and unsanitary to restore or reuse because the dirt of floodwater that they absorbed are hazardous. This type of disposable materials includes wet mattresses, pads and cushions, pillows, carpets, drywall, particle boards, and box springs. These items are nearly impossible to be completely washed and sanitized after being soaked in floodwater.
– Collect salvageable fabrics and clothes. Clothes and household fabrics that are wet or soaked can still be reused and sanitized. These will only need to be cleaned and washed thoroughly by soaking them for at least 10 minutes in detergent and hot water, then running them in the washing machine.
– Explore every space and pocket of saturation. Always locate the waterline and measure 15 to 20 inches above that line. Any material below that line should be inspected and discarded as necessary. Remove the base moldings, wet insulation, damaged walls, and even the flooring to expose everything beneath them and allow for further inspection of pockets of saturation.
– Be sure to clean and disinfect everything. Every corner of the rooms must be washed with water and detergent. Disinfectants should also be liberally applied after rinsing or flushing them.
– Be sure to ventilate rooms and maintain moderately balanced temperatures. Molds can start to grow in an environment that has a temperature between 68 and 86 degrees Fahrenheit.
These safety guidelines should also be observed by civilians who opt to clean their houses personally. However, to ensure that houses are completely cleaned and dried up during the process of water damage restoration, Northern Virginia advises citizens to still hire the assistance of water damage restoration professionals.